Each brass stylus is 1/4" in diameter, 9" long, and have a 4-1/4" rubber grip in the center. Both ends are precisely ground and polished to the desired shape and profile, with a different shape on either end.
There are four different end combinations:
Rat Tail / Rake:
Chisel Point / Nut Pick:
Arrow Point / Long Rake:
Dome / Dotter:
| Description | Price |
|---|---|
| Rat Tail / Rake | $19.95 |
| Chisel Point / Nut Pick | $19.95 |
| Arrow Point / Long Rake | $19.95 |
| Dome / Dotter | $19.95 |
The Chisel shaper has a 1/2" wide by 3" long brass blade. The flat is great at getting into small spaces. Comes complete with a wood handle.
The Stiletto shaper has a 1/2" wide by 3" long brass blade. The point is great at getting into small spaces. Comes complete with a wood handle.
The Brass Spade Shaper has a 4" long brass blade, 2" wide at the back, and tapering to a point at the front. Both front edges have been beveled to a sharp edge. This tool is also a great hand-held brass marver, similar to the Japanese kote. Comes complete with a wood handle.
| Description | Price |
|---|---|
| Chisel Shaper | $19.95 |
| Stiletto Shaper | $19.95 |
| Spade Shaper | $29.95 |
When I first saw this tool, it reminded me of the wood handled knives my Dad used to have, with the rivits holding the wood handle in place.
The tool is a single 7" long piece of stainless steel, with a sharp, 1" long blade on one end, and a 1-3/4" x 3/8" spatula on the other end. The very end of the spatula is turned up.
The wood handle is 3-1/2" long.
| Description | Price |
|---|---|
| Bladed Shaper S1 | $6.00 |
Clockwise, from top.
| Part Number | Description | Price |
|---|---|---|
| SHAPE | Shaping Tool | $6.50 |
| SH-SER | Single Edge Razor | $4.50 |
| SH-UB | Sharon Shaper | $4.50 |
| SH-KE | Knife Edge Shaping Tool | $6.00 |