If you are going to be making beads, you are going to need some mandrels. We offer a complete selection of sizes, styles, and types.
12" long, stainless steel mandrels.
| Part Number | Description | Price |
|---|---|---|
| MAN116-12 | 1/16" diameter | $6.00/dozen |
| MAN332-12 | 3/32" diameter | $7.50/dozen |
| MAN18-12 | 1/8" diameter | $9.75/dozen |
| MAN532-12 | 5/32" diameter | $8.00 /6 |
| MAN316-12 | 3/16" diameter | $10.50 /6 |
| MAN14-12 | 1/4" diameter | $10.00 /3 |
Stainless steel tubing, 16" long.
| Part Number | Description | Price |
|---|---|---|
| SST14-16 | 1/4" dia. x 16" long | $9.50 ea. |
| SST38-16 | 3/8" dia. x 16" long | $10.00 ea. |
| SST12-16 | 1/2" dia. x 16" long | $10.50 ea. |
Stainless steel tubing, 12" long. One end has been flattened aproximately 2 1/2". You can use the flattened end to make beads with an oval hole. Or, you can use the round end. Available in four diameters.
| Part Number | Description | Price |
|---|---|---|
| 06-0520 | 6 mm diameter | $8.00 ea. |
| 06-0076 | 8 mm diameter | $9.00 ea. |
| 06-0077 | 10 mm diameter | $9.00 ea. |
| 06-0078 | 12 mm diameter | $10.00 ea. |
Used to make large holes in glass beads, rings, sculpture, or core formed vessels. The total length is 12". The large diameter stainless head is 2" long, and is cored out 7/8 of its length to make it lighter. The 5/32" diameter handle allows quicker rotations and makes marvering easier than if the whole tool were the same diameter. Also, unlike tubing, you do not have to worry about moisture getting trapped in the handle and burning you. Available in 7 diameters.
| Part Number | Description | Price |
|---|---|---|
| MAN-38 | 3/8" diameter | $10.00 ea. |
| MAN-716 | 7/16" diameter | $11.00 ea. |
| MAN-12 | 1/2" diameter | $11.00 ea. |
| MAN-916 | 9/16" diameter | $12.00 ea. |
| MAN-58 | 5/8" diameter | $12.00 ea. |
| MAN-1116 | 11/16" diameter | $13.00 ea. |
| MAN-34 | 3/4" diameter | $13.00 ea. |
Uset to make two hole buttons or beads. Use with bead release, just like you would with a regular mandrel. Available in two sizes.
| Part Number | Description | Price |
|---|---|---|
| MAN116TRIMLT | 1/16" diameter tines | $4.50 ea. |
| MAN332TRIMLT | 3/32" diameter tines | $4.50 ea. |
This ingenious little mandrel does the impossible: it makes 3 holes in your bead, with one at right angles to the other two! It does so by allowing you to disassemble the mandrel when you have finished making your bead. Useful for making pendents, necklesses, etc.
The thru hole is 5/32" in diameter, and the cross hole is 1/8" in diameter. Use with bead release, just like you would with a regular mandrel.
| Part Number | Description | Price |
|---|---|---|
| 06-0092 | 5/32" diameter | $15.00 ea. |